MC55 AT Command Set
18. Miscellaneous Commands
18.
Miscellaneous Commands
The AT Commands described in this chapter are related to various areas.
18.1
A/ Repeat previous command line
Syntax
Exec Command
A/
Response(s)
PIN
ASC0
ASC1
MUX1
!
%
%
Reference(s)
V.25ter
Command Description
Repeat previous command line.
Notes
•
Line does not need to end with terminating character.
•
After beginning with the character "a" or "A" a second character "t", "T" or "/" has to follow. In case of using a
wrong second character, it is necessary to start again with character "a" or "A".
•
If autobauding is active, the command
MC55_ATC_V01.05
Confidential / Released
MUX2
MUX3
%
%
%
cannot be used (see
A/
Page 439 of 469
s
).
AT+IPR
m
obile
2/10/04