Display Elements Of The Rf382R Scanmode Reader - Siemens Simatic RF382R Scanmode Operating Instructions Manual

Pin assignment RF382R Scanmode RS232 interface
You can connect the RF382R Scanmode reader via the internal RS232 interface or via a higher-level system. Pay attention
to the correct assignment of the pins.
Table 3 Connector and reader pin assignment
Pin

Display elements of the RF382R Scanmode reader

Table 4 LED display elements on the reader
Color Meaning
Green Operating voltage present, reader ready for operation
Yellow Transponder present
Red Red LED for error display is activated permanently if correct operation of the reader cannot be guaranteed
(e. g. faulty start, checksum error during operation).
2
Pin
Device end 8-pin M12
1
2
3
4
5
6
7
8
Assignment
+ 24 V
RXD
0 V
TXD
must not be connected
must not be connected
must not be connected
Ground (shield)
J31069-D0214-U001-A1-7618, 10/2009
SIMATIC RF382R Scanmode