Process Variable Overview Display - Siemens SITRANS WM300 MFA Operating Instructions Manual

Parameter assignment
6.5 Slow speed
6.5.6

Process variable overview display

Note
Overview display alternates between input I3 and input I4 configured in programming and
cannot be changed to a display - only one channel.
Previous time period in seconds between the last pulse and the previous pulse. This can be
used as a guide to understand timing between pulses at any time in the process.
Current time is since the last pulse and will continue to increase until the next consecutive
pulse is observed on the input.
42
Probe Input I3 – Output Q1 & Q3
Q1 Alarm Off = maintained HI output.
Q1 Alarm On = maintained LO output
Q3 Alarm Off = maintained HI output.
Q3 Alarm On = maintained LO output.
Probe Input I4 – Output Q2 & Q4
Q2 Alarm Off = maintained HI output.
Q2 Alarm On = maintained LO output.
Q4 Alarm Off = maintained HI output.
Q4 Alarm On = maintained LO output.
Operating Instructions, 08/2018, A5E45090709-AA
SITRANS WM300 MFA