Configure - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

configure

Modify system configuration settings.
Synopsis
configure
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to change the following system configuration settings:
Note:
switch using the switchDisable command.
For V4.1.x, this command can now be executed on an enabled switch. If executed on
an enabled switch only a subset of the full parameter set is available. To access all
parameters controlled by this command, you must disable the switch.
150
Fabric parameters
Virtual channel settings
Zoning operation parameters
RSCN transmission mode
NS pre-zoning mode
Arbitrated Loop parameters
System services
Portlog events enable
do not
For V3.1.x, run this command on an operational switch. First disable the
Fabric OS Version 3.1.x/4.1.x Reference Guide