Nscamshow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

nscamshow

Displays information about remote devices in the Name Server Cache.
Synopsis
nscamshow
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display the local Name Server Cache information about the
devices discovered in the fabric by the Name Server Cache manager.
The message No Entry found! is displayed if the Name Server Cache
Manager hasn't discovered new switches and any new devices in the fabric.
For each remote switch found the output of this command shows the domain
number, state, revision, owner, the list of cold and hot devices for that domain
number. For each device found in the cold or hot devices list, the following
information is displayed:
Type
Pid
COS
PortName
NodeName
There may be additional lines if the device has registered any of the following
information (the switch automatically registers SCSI inquiry data for FCP target
devices): FC4s supported and fabric port name.
Operands
None.
458
U for unknown, N for N_Port, NL for NL_Port.
The 24-bit Fibre Channel address.
A list of classes of service supported by the device.
The device's port Worldwide Name.
The device's node Worldwide Name.
Fabric OS Version 3.1.x/4.1.x Reference Guide