Systemtest - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

systemtest

Run a series of diagnostic tests on a switch blade.
Synopsis
systemtest [[--slot] slotno][-log logfile]
Availability
Admin
Release
V4.1.x
Description
This command will run a suite of diagnostic tests on the specified switch blade. It
is not required to install loop-back plugs on every port as in the case of
bladediag and bladediagshort.
Note:
future releases.
Operands
This command has the following operands:
[--slot] slotno
-log logfile
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command is provided just for compatibility and may be removed in the
Specify which slot to operate on. If this option is not
specified, the current slot will be assumed.
Indicates that the output of the command will be placed in
a file named by the logfile argument. The log file will
contain all activity that occurred during the execution of the
command. All error messages are also saved in the logfile.
If this option is not specified, no log file is created.
systemtest
841