cfgCreate
Create a zone configuration.
Synopsis
cfgCreate "cfgName","member;member"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to create a new zone configuration.
A zone configuration name must begin with a letter and can be followed by any
number of letters, numbers, and the underscore character. Names are case
sensitive, for example, "Cfg_1" and "cfg_1" are different zone configurations.
Blank spaces are ignored.
The zone configuration member list must have at least one member. Empty
member lists are not allowed.
This command changes the Defined Configuration. For the change to be preserved
across switch reboots, it must be saved to non-volatile memory using the
cfgSave command. For the change to become effective, an appropriate zone
configuration must be enabled using the cfgEnable command.
Refer to the zonecreate command for more information on name and
member specifications.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security
Commands" on page 941.
cfgCreate
101