HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 740

Fabric OS Commands
Operands
This command has the following operands:
domain
login_name
Example
To set the password on a remote switch with a Domain of 2:
primaryfcs:admin> sectemppasswdset 2, "root"
Please provide password of root on primary FCS switch
in order to change this password: ********
Set remote switch root password: ********
Re-enter new password: ********
Account root has been successfully enabled on domain 2
See Also
passwd
secmodedisable
secmodeenable
secmodeshow
secnonfcspasswd
sectemppasswdreset
740
Specify the Domain of a switch where you want to change the
password. This operand is required.
Specify the login name where you want to change the
password. This operand is required.
Fabric OS Version 3.1.x/4.1.x Reference Guide