Fazoneshow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

fazoneShow

Displays fazone information.
Synopsis
fazoneShow ["pattern"[, transflag]]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display fazone information. Specifying this command with
no parameters or with the second parameter set to zero displays all fazone
configuration information for both Defined and Effective configurations. Defined
configuration information is shown from the transaction buffer. See the
cfgShow command for a description of this display.
Note:
are not required for V4.1.x.
If a parameter is specified, it is used as a pattern to match fazone names, and those
that match in the Defined configuration are displayed.
Note:
FCS switch. See
278
The pattern operand must be in quotation marks for V3.1.x. Quotation marks
When security is enabled, this command can only be issued from the Primary
"Security Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide