Cfgtransabort - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

cfgTransAbort

Abort the current zoning transaction.
Synopsis
cfgTransAbort
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to abort the current zoning transaction without committing it.
All changes made since the transaction was started will be removed and the zone
configuration database restored to the state before the transaction was started.
If a transaction is open on a different switch in the fabric when this command is
run, the transaction on the other switch remains open and unaffected.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Operands
For V3.1.x: none.
For V4.1.x: this command has the following operand:
token
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
Specify the token ID of an abortable transaction. Use the
cfgtransshow command to obtain the token ID of a
transaction.
cfgTransAbort
119