HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 160

Fabric OS Commands
Table 6: Configure Command Portlog Events Parameters (Continued)
msRemR: inter-sw MS response
(V4.1.x only)
nsRemQ: inter-sw NS query
nsRemR: inter-sw NS response
rscn: RSCN
state: Fibre Channel state (V4.1.x only)
xalloc: alloc an exchange (V4.1.x only)
xfree: free an exchange (V4.1.x only)
xerr: exchange error (V4.1.x only)
xstate: exchange state (V4.1.x only)
seq: sequence (V4.1.x only)
seqst: sequence state (V4.1.x only)
iu: iu (V4.1.x only)
payload: frame payload (V4.1.x only)
reconf: fabric reconfiguration (V3.1.x only)
LR1: LR2 (V3.1.x only)
zone: zone requrest/response
(V4.1.x only)
cmd: fss command log (V4.1.x only)
event fss event log (V4.1.x only)
msg: fss message log (V4.1.x only)
Operands
None.
160
Field Default Range
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
On On/Off
Fabric OS Version 3.1.x/4.1.x Reference Guide