Cfgenable - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

cfgEnable

Enable a zone configuration.
Synopsis
cfgEnable "cfgName"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to commit any zone configuration in the transaction buffer to
the volatile and non-volatile memory and enable the specified zone configuration.
This command ends the current zoning transaction.
The specified zone configuration is built by checking for undefined zone names,
zone alias names, or other inconsistencies by expanding zone aliases, removing
duplicate entries, and then installing the effective configuration.
If the build fails, the previous state is preserved (zoning remains disabled, or the
previous Effective configuration remains in effect). If the build succeeds, the new
configuration replaces the previous configuration. See the cfgShow command
for a description of defined and effective configurations.
This command ends and commits the current transaction. If a transaction is open
on a different switch in the fabric when this command is run, the transaction on
the other switch is automatically aborted. A message is displayed on the other
switch notifying the transaction abort.
For V3.1.x, this command changes the Effective Configuration. For the change to
be preserved across switch reboots, it must be saved to non-volatile memory using
the cfgSave command.
Fabric OS Version 3.1.x/4.1.x Reference Guide
cfgEnable
107