HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 373

inactTID
helloTID
dbRtxTID
lsrRtxTID
inactTo
helloTo
rXmitTo
nCmdAcc
nInvCmd
nHloIn
nInvHlo
nLsuIn
nLsaIn
attHloOut
nHloOut
attLsuOut
nLsuOut
attLsaOut
nLsaOut
Fabric OS Version 3.1.x/4.1.x Reference Guide
Inactivity timer ID.
Hello timer ID.
Database retransmission timer ID.
LSR retransmission timer ID.
Inactivity time out value, in milliseconds. When this time
out expires, the adjacency with the neighbor switch is
broken and new paths are computed to all possible
destination switches in the fabric.
Hello time out value, in milliseconds. When this time out
expires, a Hello frame is sent to the neighbor switch
through this port.
Retransmission time out value, in milliseconds. It is used
to transmit topology information to the neighbor switch.
If no acknowledgement is received within rXmitTo,
frame is retransmitted.
Total number of commands accepted from the neighbor
switch. Number includes Hellos, Link State Updates
(LSUs) and Link State Acknowledgements.
Number of invalid commands received from the
neighbor switch. Usually commands with an FSPF
version number higher than the one running on the local
switch.
Number of Hello frames received from the neighbor
switch.
Number of invalid Hello frames (Hello frames with
invalid parameters) received from the neighbor switch.
Number of LSUs received from the neighbor switch.
Number of LSAs received from the neighbor switch.
Number of attempted transmissions of Hello frames to
the neighbor switch.
Number of Hello frames transmitted to the neighbor
switch.
Number of attempted transmissions of LSUs to the
neighbor switch.
Number of LSUs transmitted to the neighbor switch.
Number of attempted transmissions of LSAs to the
neighbor switch.
Number of LSAs transmitted to the neighbor switch.
interfaceShow
373