HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 483

Operands
This command has the following operands:
slotnumber
(V4.1.x only)
portnumber
alias
Example
To add a SCSI Read and Write monitor to blade 2 port 4:
switch:admin> perfAddRWMonitor 2/4, "SCSI_RW"
SCSI Read/Write monitor #1 is added
switch:admin>
See Also
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify the slot number for a StorageWorks Core
switch. For all other switches this operand is not
required. The slot number must be followed by a slash
( / ) and the port number, so that each port is
represented by both slot number (1 through 4, or 7
through 10), and port number (0 through 15).
The StorageWorks Core switch has a total of 1–10
slots. Slot number 5 and 6 are control processor cards,
and slot 1 through 4, and 7 through 10, are port
cards. On each port card, there are 16 ports counted
from the bottom, 0 to 15.
Specify a port number. Valid values for port number
vary depending on the switch type. This operand is
required.
Specify a name for this monitor. This character string
can be a maximum of 10 characters long and is
truncated if more characters are specified. This
operand must be enclosed in quotation marks. This
operand is optional. The default alias is SCSI R/W.
perfAddRWMonitor
483