Diagsilkworm - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

diagsilkworm

Enable or disable silkworm mode.
Synopsis
diagsilkworm [mode | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to enable or disable silkworm mode. The mode is saved in
non-volatile memory and stays in that mode until the next execution of
diagsilkworm.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
Silkworm mode, when enabled, notifies the diagnostics environment and test
methods that the tests are running in silkworm mode. For proper operation FCSW
mode must also be disabled.
210
Caution: This mode may not be used by burn-in or POST scripts for
multi-bladed products because it is a switch-wide configuration.
Fabric OS Version 3.1.x/4.1.x Reference Guide