Itemlist - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

itemlist

List parameter syntax and grammar information.
Synopsis
<item_list> = <element> | <element> <white> <item_list>
<element> = <item> | <item> - <item>
<item> = <num> | <slot> [ <white> ] / [ <white> ] <num>
<slot> = <num>
<num> = <hex> | <int>
<int> = <int> <digit> | <digit>
<hex> = 0x <hex digit> | <hex> <hex digit>
<digit> = 0|1|2|3|4|5|6|7|8|9
<hex digit> = <digit> |A|B|C|D|E|F|a|b|c|d|e|f
<white> = *["\t\f\r ,"]
Release
V4.1.x
Description
All kernel diagnostics have at least one item list parameter to specify which ports
to test. The normal default value for this parameter is to select everything.
Note:
view the help page for this command type help itemlist.
If you wish to restrict the items to be tested to a smaller set the parameter value is
an item list with the following characteristics:
Fabric OS Version 3.1.x/4.1.x Reference Guide
This is not a command, rather it is a common parameter to many commands. To
It is a comma separated list of items.
Each item in the list may be a single element or a range of elements separated
with a "-" character.
itemlist
389