Operands
This command has the following operands:
mode
-show
If no operand is specified the current value is displayed.
Example
To enable silkworm mode:
switch:admin> diagsilkworm
Silkworm mode is 0 (Disabled).
switch:admin> diagsilkworm 1
Config update Succeeded
Silkworm mode is now 1 (Enabled).
san95:admin>
See Also
diaghelp
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify 1 to enable silkworm mode, specify 0 to
disable silkworm mode. This operand is optional.
Specify this operand to display the current mode
setting. This operand is optional.
diagsilkworm
211