Advanced Performance Monitoring Commands; Performance Monitoring Commands - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands for Licensed Products

Advanced Performance Monitoring Commands

The following commands are available with the purchase of an Advanced
Performance Monitoring license key. For more detailed information about
Performance Monitoring refer to the HP StorageWorks Advanced Performance
Monitoring Version 3.1.x/4.1.x User Guide.
Table 23: Performance Monitoring Commands
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddUserMonitor
perfAddWriteMonitor
perfCfgClear
perfCfgRestore
perfCfgSave
perfcleareemonitor
perfclearfiltermonitor
perfClrAlpaCrc
perfDelEEMonitor
perfDelFilterMonitor
perfSetPortEEMask
perfShowAlpaCrc
906
Command Description
Add an end-to-end monitor to a port.
Add an IP monitor to a port.
Add a SCSI Read monitor to a port.
Add a SCSI Read and Write monitor to a port.
Add a SCSI traffic frame monitor to a port.
Add a user-defined monitor to a port.
Add a SCSI Write monitor to a port.
Clear the performance monitoring settings
from flash memory.
Restore performance monitoring settings from
flash memory.
Save the current performance monitoring
settings to flash memory.
Clear statistics counters of an end- to-end
monitor on a port.
Clear statistics counters of a filter-based
monitor.
Clear an AL_PA device CRC count by the port
and AL_PA.
Delete an end-to-end monitor on port.
Delete a filter-based monitor.
Set overall mask for end-to-end (EE) monitors.
Display the AL_PA CRC count by port or by
AL_PA.
Fabric OS Version 3.1.x/4.1.x Reference Guide