Fabric OS Commands for Licensed Products
QuickLoop Fabric Assist Mode Commands
The following commands are for QuickLoop Fabric Assist Mode. For detailed
information about Extended Fabrics refer to the HP StorageWorks QuickLoop
Fabric Assist Version 3.1.x User Guide.
Table 19: QuickLoop Fabric Assist Mode Commands
fazoneAdd
fazoneCreate
fazoneDelete
fazoneRemove
Note:
only.
902
Command
The Quickloop Fabric Assist Mode feature is available on Fabric OS V3.1.x
Description
Add members to an existing QuickLoop Fabric
Assist zone.
Create a QLFA zone.
Delete an existing QuickLoop Fabric Assist zone.
Remove member or members from an existing
QuickLoop Fabric Assist zone.
Fabric OS Version 3.1.x/4.1.x Reference Guide