Mstdenable - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

msTdEnable

Enable the Management Server Topology Discovery service.
Synopsis
msTdEnable ["ALL"]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to enable the Management Server Topology Discovery service
locally or fabric-wide. This command enables the Topology Discovery service on
the local switch and commits the change to the non-volatile memory of the local
switch. If the optional operand "ALL" is given, then the command is executed on
the entire fabric.
Once enabled, even in the event of a reboot, the switch will be boot up with the
Management Server Topology Discovery service enabled.
Topology Discovery service requires the attached devices which include attached
switches to support the RNID ELS command.
Note:
only be issued from the Primary FCS switch. See
Operands
This command has the following operand:
ALL
442
When security is enabled, and using the "ALL" operand, this command can
Specify ALL to enable the topology discovery service on all
switches in the fabric. For V3.1.x, the operand ALL must be
enclosed in quotation marks. The operand ALL must be in capital
letters. This operand is optional.
"Security Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide