HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 790

Fabric OS Commands
Note:
SID-DID pairs is named a LINK. This table is used for gathering statistics that match the
LINK.
Operands
This command has the following operands:
passcount
(V3.1.x only)
-passcnt count
(V4.1.x only)
-ports itemlist
(V4.1.x only)
Example
To run a statistics counter test on a switch (V3.1.x example):
switch:admin> statsTest
Running Statistics Cnt Test ... passed.
switch:admin>
To run a statistics counter test on a switch (V4.1.x example):
switch:admin> statstest -passcnt 1 -ports 1/0-15
Running Statistics Counter Test ....... passed.
switch:admin>
Errors: V4.1.x
When it detects failure(s), the subtest may report one or more of the following
error messages:
790
There is a LINK table that stores 16 pairs of SID-DID address. Each of the
DIAG-STSINIT
DIAG-STSNULL
DIAG-STSSID
DIAG-STSXMIT
DIAG-STSRCV
DIAG-STSFRMCNT
Specify the number of times to perform this test. The default
value is 1. This operand is optional.
Specify a list of user ports to run the test. If omitted, all the
user ports in the switch will be assumed. See itemlist
for more information about selecting ports. This operand is
optional.
Fabric OS Version 3.1.x/4.1.x Reference Guide