Fabric OS Commands
Operands
This command has the following operands:
cfgName
member
Example
To add two new zones to the configuration "Test_cfg":
switch:admin> cfgAdd "Test_cfg", "redzone; bluezone"
See Also
cfgClear
cfgCreate
cfgDelete
cfgDisable
cfgEnable
cfgRemove
cfgSave
cfgShow
cfgTransAbort
cfgtransshow
98
Specify a name for the zone configuration in
quotation marks. This operand is required.
Specify a zone member or a list of zone members to
be added to the configuration, in quotation marks,
separated by semicolons. Members can be specified
in one or more of the following ways:
Zone names
QuickLoop names
FA (Fabric Assist) zone names
This operand is required.
Fabric OS Version 3.1.x/4.1.x Reference Guide