Portlogshowport - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

portlogshowport

Displays the port log of specified port, with page breaks.
Synopsis: V3.1.x
portlogshowport [portid [, count [, saved]]]
Synopsis: V4.1.x
portlogshowport [portid]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display the port log, showing 22 entries at a time. It is
identical to portlogdump, except that portlogdump does not prompts the
user to type return between each page of output.
If the port log is disabled, the following message is printed as the first line (see
portlogclear for details):
Refer to the portlogdump command for more information on the data
returned by this command.
Operands
This command has the following operands:
count
(V3.1.x only)
saved
(V3.1.x only)
Fabric OS Version 3.1.x/4.1.x Reference Guide
WARNING: port log is disabled
Specify the maximum number of lines to display. Only the most
recent count entries are displayed. This operand is optional.
Specify a non-zero value to display the saved port log from the
last switch fault. See uptime for a list of conditions that cause a
fault. The count is ignored when displaying the saved log. This
operand is optional.
portlogshowport
585