Fabric OS Commands
qlStatsShow
Displays QuickLoop statistics.
Synopsis
qlStatsShow
Availability
All users.
Release
V3.1.x
Description
Use this command to display the following QuickLoop switch statistics:
Last QL init time:
QL init attempted:
QL init succeeded:
Single switch QL:
Dual switch QL:
QL enabled:
QL disabled:
Port caused QL init:
Note:
670
This command requires an Advanced Zoning license.
Time of last QuickLoop initialization.
Number of QuickLoop initialization attempts.
Number of times QuickLoop is initialized.
Number of times as single switch QuickLoop.
These numbers are only valid when two
switches are configured to run as peers in
QuickLoop.
Number of times as dual switch QuickLoop.
These numbers are only valid when two
switches are configured to run as peers in
QuickLoop.
Number of times QuickLoop is enabled.
Number of times QuickLoop is disabled.
Port that caused last QuickLoop initialization.
Fabric OS Version 3.1.x/4.1.x Reference Guide