Fabric OS Commands
Operands
This command has the following operand:
0|wwn
Example
To set another switch as a QuickLoop partner switch:
switch:admin> qlPartner "10:00:00:60:69:10:10:ec"
See Also
configShow
qlShow
660
Specify 0 to set the QuickLoop to run on a single switch.
Specify a WWN to set the QuickLoop to run on dual switches.
This operand is optional.
If no operand is specified the current value is displayed.
Fabric OS Version 3.1.x/4.1.x Reference Guide