HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 851

Hops
Out Port
In Ports
Total Bandwidth
Bandwidth Demand
Flags
Operands
This command has the following operand:
domainnumber
Examples
The following is a V3.1.x example:
switch:admin> topologyshow
11 domains in the fabric; Local Domain ID: 7
Domain Metric
--------------------------------------------------------------------------
2 2000
Type <CR> to continue, Q<CR> to stop:
4 1500
Type <CR> to continue, Q<CR> to stop:
Fabric OS Version 3.1.x/4.1.x Reference Guide
The maximum number of hops to reach destination
domain.
Port that incoming frame will be forwarded to, in order
to reach the destination domain.
Input ports that use the corresponding Out Port to reach
the destination domain. This is the same information
provided by portRouteShow and uRouteShow.
The maximum bandwidth of the out port.
The maximum bandwidth demand by the in ports.
Always "D," indicating a dynamic path. A dynamic
path is discovered automatically by the FSPF path
selection protocol.
Specify the destination domain for which topology
information is to be displayed. This operand is optional.
When no domain number is specified, this command
displays the topology information of all the domains in the
fabric.
Hops Out Port
4 0
3 0
In Ports Flags
0x00000000 D
0x00000000 D
topologyShow
Bandwidth Name
2 (Gbs) "web131"
2 (Gbs) "web188"
851