Portstatsclear - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

portstatsclear

Clear the hardware statistics of a specified switch port.
Synopsis: V3.1.x
portstatsclear portnumber
Synopsis: V4.1.x
portstatsclear [slotnumber/]portnumber
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command clears the hardware statistics for a specified switch port. At the
same time, this command also clears the hardware statistics for the associated
ports in the target port quad.
Operands
This command has the following operands:
slotnumber
(V4.1.x only)
portnumber
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify the slot number for a StorageWorks Core switch.
For all other switches this operand is not required. The slot
number must be followed by a slash ( / ) and the port
number, so that each port is represented by both slot
number (1 through 4, or 7 through 10), and port number
(0 through 15).
The StorageWorks Core switch has a total of 1–10 slots.
Slot number 5 and 6 are control processor cards, and slot
1 through 4, and 7 through 10, are port cards. On each
port card, there are 16 ports counted from the bottom, 0 to
15.
Specify a port number. Valid values for port number vary
depending on the switch type. This operand is required.
portstatsclear
607