HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 552

Fabric OS Commands
When no operand is specified, the command reports the current port persistent
enabled status for all ports in the switch. The value of YES is displayed for ports
that are persistently enabled.
Example
To configure port 3 as persistently enabled:
switch:admin> portcfgpersistentenable 3
Committing configuration...done.
switch:admin> portcfgpersistentenable
Ports: 0 1
--------------------------------
Enabled - -
switch:admin>
See Also
configure
configshow
configdefault
portcfgdefault
portcfgpersistentdisable
portcfgshow
portshow
switchshow
552
2 3 4 5 6
- YES - - -
7
-
Fabric OS Version 3.1.x/4.1.x Reference Guide