Qloopcreate - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

qloopCreate

Create a QuickLoop.
Synopsis
qloopCreate "qloopname", "member;member"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to create a QuickLoop.
A QuickLoop name must begin with a letter and be followed by any number of
letters, digits, and underscore characters. Names are case sensitive, for example,
"Qloop_1" indicates a different QuickLoop than "qloop_1". Blank spaces are
ignored.
The QuickLoop member list must have one or two members; an empty list is not
allowed.
When a configuration is enabled, all QuickLoops defined in the configuration
must resolve to a maximum of two switch World Wide Names.
Zone alias names entered as members of this QuickLoop must be defined with
WWNs. Zone alias names that are defined by domain and port number, or AL_PA
are not accepted as members of the QuickLoop.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
qloopCreate
651