HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 485

Operands
This command has the following operands:
slotnumber
(V4.1.x only)
portnumber
alias
Example
To add a SCSI traffic frame monitor to blade 2 port 4:
switch:admin> perfAddSCSIMonitor 2/4, "SCSI_FR"
SCSI traffic frame monitor #0 added
switch:admin>
See Also
perfAddEEMonitor
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddUserMonitor
perfAddWriteMonitor
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify the slot number for a StorageWorks Core
switch. For all other switches this operand is not
required. The slot number must be followed by a slash
( / ) and the port number, so that each port is
represented by both slot number (1 through 4, or 7
through 10), and port number (0 through 15).
The StorageWorks Core switch has a total of 1–10
slots. Slot number 5 and 6 are control processor cards,
and slot 1 through 4, and 7 through 10, are port
cards. On each port card, there are 16 ports counted
from the bottom, 0 to 15.
Specify a port number. Valid values for port number
vary depending on the switch type. This operand is
required.
Specify a name for this monitor. This character string
can be a maximum of 10 characters long and is
truncated if more characters are specified. This
operand must be enclosed in quotation marks. This
operand is optional. The default alias is SCSI FRAME.
perfAddSCSIMonitor
485