HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 577

Event
Port #
Cmd
Args
For a full explanation of the information displayed by this command refer to the
HP StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide.
Operands
This command has the following operands:
port
(V3.1.x only)
portid
(V4.1.x only)
Example
To display the port log dump for a port with area number of 5:
switch:admin> portlogdumpport 5
time
-------------------------------------------------
16:43:35.963
16:43:35.963
16:43:35.967
16:43:35.970
16:43:55.974
16:43:55.974
16:43:55.978
16:43:55.980
16:43:57.772
16:43:57.776
16:43:57.781
switch:admin>
Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays the task event that generated log entry.
Displays the Port number that logged the event.
Defined by the event. Refer to the
Operating System Procedures Version 3.1.x/4.1.x User Guide
more information.
Displays more information about the event.
For ioctl events, these are the I/O control arguments
For Tx and Rx, these are the first two header words and word four
of the FC-PH frame along with the first word of the payload and
internal decoding field.
Specify the port you want to display the port log for. Valid
input varies depending on switch type.
Specify the area number of port to be displayed. If a port area
number is specified, all other ports on the switch are ignored.
This operand is optional.
task event
PORT Rx
PORT Tx
PORT Tx
PORT Rx
PORT Rx
PORT Tx
PORT Tx
PORT Rx
PORT Tx
PORT Rx
PORT Rx
port cmd args
5 40 02fffffd,00fffffd,0a3bffff,14000000
5 0 c0fffffd,00fffffd,0a3b0536
5 40 02fffffd,00fffffd,0537ffff,14000000
5 0 c0fffffd,00fffffd,05370a3c
5 40 02fffffd,00fffffd,0a3fffff,14000000
5 0 c0fffffd,00fffffd,0a3f053a
5 40 02fffffd,00fffffd,053bffff,14000000
5 0 c0fffffd,00fffffd,053b0a40
5 20 02fffc08,00fffc04,053cffff,01000000
5 0 c0fffc04,00fffc08,053c002a
5 132 03fffc04,00fffc08,053c002a,01000000
portLogDumpPort
HP StorageWorks Fabric
for
577