HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 345
Hp storageworks fabric os v3.1.x/4.1.x reference guide (aa-rs24c-te, june 2003)
Hide thumbs
Also See for StorageWorks MSA 2/8 - SAN Switch:
- Reference manual (394 pages) ,
- User manual (270 pages) ,
- Installation manual (72 pages)
Table of Contents
Advertisement
Operands
None.
Example
To displays High Availability feature information:
switch:admin> hadump
Dump HA Data ...
Local CP (Slot 5, CP0): Active
Remote CP (Slot 6, CP1): Standby, Healthy
HA enabled, Heartbeat Up, HA State not in sync
<output truncated>
See Also
haenable
haFailover
haShow
Fabric OS Version 3.1.x/4.1.x Reference Guide
HA State Not
The system is unable to synchronize the two CPs, due to the
In Sync
Standby CP being faulty or another system error. If a fail-over
were to take place at this time, the Standby CP would be
rebooted, and the fail-over will be disruptive.
IP and Fibre Channel addresses configured for the switch.
hadump
345
Advertisement
Table of Contents
