Fazoneadd - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

fazoneAdd

Add a member to a Fabric Assist zone.
Synopsis
fazoneAdd "fazoneName","member;member"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command adds one or more members to an existing Fabric Assist zone.
This command does not change the defined configuration (which you can view
using the cfgShow command) until the cfgSave command is issued. For
the change to become effective, an appropriate Fabric Assist zone configuration
must be enabled using the cfgEnable command. For the change to be
preserved across switch reboots, it must be saved to non-volatile memory using
the cfgSave command.
Note:
FCS switch. See
268
When security is enabled, this command can only be issued from the Primary
"Security Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide