diagmodepr
Enable or disable mode messages.
Synopsis
diagmodepr [mode | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to enable print mode. The mode is saved in non-volatile
memory and stays in that mode until the next execution of diagmodepr.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
Print mode, when enabled, will cause extra messages to be displayed in the
burn-in and post scripts. The exact behavior varies depending on the script being
run.
Operands
This command has the following operands:
mode
-show
If no operand is specified the current value is displayed.
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify 1 to enable print mode, specify 0 to disable
print mode. This operand is optional.
Specify this operand to display the current mode. This
operand is optional.
diagmodepr
195