zoneDelete
Delete a zone.
Synopsis
zoneDelete "zoneName"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to delete a zone.
This command changes the Defined Configuration. For the change to be preserved
across switch reboots, it must be saved to non-volatile memory using the
cfgsave command. For the change to become effective, an appropriate zone
configuration must be enabled using the cfgenable command.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Operands
This command has the following operand:
zoneName
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security
Commands" on page 941.
Name of the zone to be deleted, in quotation marks. This
operand is required.
zoneDelete
891