perfShowEEMonitor
Displays end-to-end monitor information and frame traffic on a port.
Synopsis: V3.1.x
perfShowEEMonitor portnumber[, interval]
Synopsis: V4.1.x
perfShowEEMonitor [slotnumber/]portnumber[, interval]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display end-to-end monitor information and frame traffic on
a port. This command can display (if no interval operand is specified):
If you do not specify a value for the interval operand this command displays
end-to-end monitor information and a cumulative count of the traffic detected by
the monitor. If you specify a value for the interval operand, this command
displays a snapshot of the traffic at the specified interval.
Fabric OS Version 3.1.x/4.1.x Reference Guide
Key - the monitor number
SID - Sending ID
DID - Destination ID
Owner_app - TELNET or WEB_TOOLS
Owner_ip_addr - the IP address of the owner of the filter monitor
Tx_count - Number of FC words transmitted
Rx_count - Number of FC words received
Crc_count - Number of frames with CRC errors
perfShowEEMonitor
515