HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 867

The test flow for each SRAM is as follows:
1. Fill RAM with alternating FFFF 0000 pattern. (Subtest 1: turboram memory
2. For each incrementing address read FFFF 0000 pattern and write 0000 FFFF.
3. For each incrementing address read 0000 FFFF pattern and write FFFF 0000.
4. For each decrementing address read FFFF 0000 pattern and write 0000 FFFF.
5. For each decrementing address read 0000 FFFF pattern and write FFFF 0000.
6. Repeat steps 1-5 with AAAA 5555 pattern.
Operands
This command has the following operands:
passcount
(V3.1.x only)
Fabric OS Version 3.1.x/4.1.x Reference Guide
RX Buffer Frame Tail RAM
RX Buffer Frame Link RAM
TX Buffer Descriptor RAM (Output/Input Frame Tracking, Buffer State)
Private RAM
Phantom CAM
Phantom DID RAM
Phantom ALPA RAM
Frame Filtering Destination Group Table RAM
Frame Filtering Source Group Table RAM
Field Definition Block RAM
Frame Filtering Destination CAM
Frame Filtering Source CAM
Special Memory RAM
fill)
(Subtest 2: turboram r-m-w inc 1)
(Subtest 3: turboram r-m-w inc 2)
(Subtest 4: turboram r-m-w dec 1)
(Subtest 5: turboram r-m-w dec 2)
Specify the number of times to perform this test. The
default value is 1. This operand is optional.
turboRamTest
867