Msplcleardb - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

msPlClearDB

Clear the Management Server Platform database on all switches in the fabric.
Synopsis
msPlClearDB
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command enables an Admin user to clear the entire Management Server
Platform database on all switches in the fabric. Since this operation is
non-recoverable (once issued, the database will be erased), it should not be used
unless it is intended to resolve a database conflict between two joining fabrics or
to establish an entire new fabric with an empty database.
Platform service is available in firmware v2.3 and above. Lower level firmware
releases do not support it.
Note:
FCS switch. See
Operands
None.
434
When security is enabled, this command can only be issued from the Primary
"Security Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide