ipAddrSet
Set the IP Address details for a switch or Control Processor.
Synopsis: V3.1.x
ipAddrSet
Synopsis: V4.1.x
ipAddrSet [option]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to set the Ethernet and Fibre Channel IP addresses on the
switch.
Note:
operand is not available on the StorageWorks 2 Gb SAN switch.
Parameters: V3.1.x
For V3.1.x, use this command to set the Ethernet and Fibre Channel IP and
Subnetmask addresses. You are also prompted to set the Gateway IP Address. The
option operand is not available in V3.1.x.
In V3.1.x, you are prompted to set the following values:
Ethernet IP Address
Ethernet Subnetmask
Fibre Channel IP
Address
Fabric OS Version 3.1.x/4.1.x Reference Guide
option
The
operand is only available on the StorageWorks Core switch. This
Set the Ethernet IP address of the switch.
Set the Ethernet subnetmask IP of the switch.
Set the Fibre Channel address of the switch.
ipAddrSet
381