Cfgdelete - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

cfgDelete

Delete a zone configuration.
Synopsis
cfgDelete "cfgName"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to delete a zone configuration.
This command changes the Defined Configuration. For the change to become
effective, an appropriate zone configuration must be enabled using the
cfgEnable command.
This command changes the Defined Configuration. For the change to be preserved
across switch reboots, it must be saved to non-volatile memory using the
cfgSave command. For the change to become effective, an appropriate zone
configuration must be enabled using the cfgEnable command.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Operands
This command has the following operand:
cfgName
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
Specify the name of zone configuration to be deleted
in quotation marks. This operand is required.
cfgDelete
103