Installing And Configuring The Snmp Agent; Installation; Before You Configure The Snmp Agent Operations Environment - HP T9576G06 Management Manual

2
Installing and Configuring the SNMP
Agent
The section tells you how to install, start, and stop the SNMP agent and how to
configure the following:
SNMPCTL file
Multiple SNMP agents per node
page 2-23)
EMS collector
Security (Configuring Security
TCP/IP request/response connections
Connections
Trap destinations

Installation

The SNMP agent is delivered ready to be installed and started without any custom
configuration.
You install the SNMP agent using the Distributed Systems Management/Software
Configuration Manager DSM/SCM product. The SNMP agent program file is installed
on your system as:
$SYSTEM.SYSTEM.SNMPAGT
Note. For G-series or later releases of the NonStop Kernel, DSM/SCM replaces the Install
program as the standard tool for installing and managing new software.
Refer to the DSM/SCM User's Guide for complete software installation information.
The device type for the SNMP agent is 31.
Before You Configure the SNMP Agent
Operations Environment
To configure SNMP you must get the following information from the person responsible
for the SNMP agent and from the person responsible for the SNMP manager with
(The SNMPCTL File
(Configuring the EMS Collector
on page 2-26)
on page 2-34)
(Configuring Trap Destinations
SNMP Configuration and Management Manual—424777-006
on page 2-6)
Starting Multiple SNMP Agents on Each Node
on page 2-25)
(Configuring TCP/IP Request/Response
on page 2-38)
2 -1
on