Zoneremove - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

zoneRemove

Remove a member from a zone.
Synopsis
zoneRemove "zoneName", "member;member"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to remove one or more members from an existing zone.
The member list is located by an exact string match; therefore, it is important to
maintain the order when removing multiple members. For example, if a zone
contains "array2; array3; array4," removing "array3; array4" succeeds. but
removing "array4; array3" fails.
If all members are removed, the zone is deleted.
This command changes the Defined Configuration. For the change to be preserved
across switch reboots, it must be saved to non-volatile memory using the
cfgsave command. For the change to become effective, an appropriate zone
configuration must be enabled using the cfgenable command.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
zoneRemove
895