Zoneadd - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

zoneAdd

Add a member to the zone.
1
Synopsis
zoneAdd "zoneName", "member;member"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to add one or more members to an existing zone.
This command changes the Defined Configuration. For the change to be preserved
across switch reboots, it must be saved to non-volatile memory using the
cfgsave command. For the change to become effective, an appropriate zone
configuration must be enabled using the cfgenable command.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
886
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide