HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 623

-patsize size
(V4.1.x only)
-seed seed
(V4.1.x only)
-listtype
porttype
(V4.1.x only)
Example
To run a functional test on an active switch (V3.1.x example):
switch:admin> porttest -1,1000
To run a functional test on an active switch (V4.1.x example):
switch:admin> porttest -ports 1/1-1/3
See Also
crossporttest
fporttest
loopporttest
portloopbacktest
porttestshow
spinfab
stopporttest
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify the size of the pattern. Default size of the
pattern is 1024 bytes. Valid rang of values are 4 bytes
through 2112 bytes.
Specify the seed pattern to be used with pattern.
Default seed value is 0xaa.
Specify the type of ports to run porttest. The
default value is -1. Valid values are:
-1 All ports.
-2 All E_ports.
-3 All L_ports.
-4 All F_ports.
-5 All Loopback ports.
porttest
623