trunkDebug
Debug a trunk link failure.
Synopsis
trunkDebug port1, port2
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to debug a trunk link failure. This command reports one of the
following messages based on the trunking properties of the two specified ports:
Fabric OS Version 3.1.x/4.1.x Reference Guide
Switch does not support trunking
Trunking license required
port x is not E_Port
port x trunking disabled
port x peed is not 2G
port x and port y are not on same quad
port x and port y connect to different switches
port x is not Trunking port due to: E_Port being disabled, or trunking may be
disabled at remote port
port x and port y cannot trunk, please check link length to make sure
difference is less than 400 m
trunkDebug
857