Cfgdisable - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

cfgDisable

Disable a zone configuration.
Synopsis
cfgDisable
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to disable the current zone configuration. The fabric returns to
non-zoning mode where all devices see each other. It also commits the zone
configuration in the transaction buffer to volatile and non-volatile memory.
This command ends and commits the current zoning transaction. If a transaction is
open on a different switch in the fabric when this command is run, the transaction
on the other switch is automatically aborted. A message is displayed on the other
switch notifying the transation abort.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Operands
None.
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
cfgDisable
105