perfShowAlpaCrc
Displays the AL_PA CRC count by port or by AL_PA.
Synopsis: V3.1.x
perfShowAlpaCrc portnumber[, ALPA]
Synopsis: V4.1.x
perfShowAlpaCrc [slotnumber/]portnumber[, ALPA]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display a specific AL_PA device CRC error count by the
port or AL_PA. If the AL_PA operand is specified, only the CRC count for that
AL_PA device is displayed. If the AL_PA operand is not specified, the CRC
counts for all the AL_PA devices on a specified port are displayed. CRC count is a
64-bit counter. When the count is over 32 bits, the CRC count value is displayed in
hexadecimal. Otherwise, CRC count is displayed in decimal format.
Note:
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Performance Monitoring license.
perfShowAlpaCrc
513