Switchcfgtrunk - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

switchCfgTrunk

Enable or disable trunking on all the ports of a switch.
Synopsis
switchCfgTrunk mode
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to enable or disable trunking on all the ports of a switch.
Note:
Operands
This command has the following operand:
mode
Example
To enable trunking on a switch:
switch:admin> switchCfgTrunk 1
done.
808
This command requires the Trunking license.
Specify 1 to enable trunking on all the ports on this switch. Specify
0 to disable trunking on all the ports on this switch. This operand is
required.
Fabric OS Version 3.1.x/4.1.x Reference Guide