Configuring Tacacs; Finding Feature Information; System Plus (Tacacs+) - Cisco Catalyst 2960-XR Security Configuration Manual

Configuring TACACS+

•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Controlling Switch Access with Terminal
Access Controller Access Control System Plus (TACACS+)
The following are the prerequisites for set up and configuration of switch access with Terminal Access
Controller Access Control System Plus (TACACS+) (must be performed in the order presented):
1 Configure the switches with the TACACS+ server addresses.
2 Set an authentication key.
3 Configure the key from Step 2 on the TACACS+ servers.
4 Enable AAA.
5 Create a login authentication method list.
6 Apply the list to the terminal lines.
OL-29434-01
Finding Feature Information, page 37
Prerequisites for Controlling Switch Access with Terminal Access Controller Access Control System
Plus (TACACS+), page 37
Information About TACACS+, page 39
How to Configure TACACS+, page 43
Monitoring TACACS+, page 50
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
5
C H A P T E R
37