Figure 72. Removing A Pci Card - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

User Serviceable Platform Components
7. Push the retention latch at the rear of the card slot to open it. See letter "A" in Figure 72.
8. If a long card is installed, press the blue plastic piece at the front of the card.
9. Pull up on the card to remove it. See letter "B" in the Figure 72.
10. Store the card in an antistatic protective wrapper.
11. Install an expansion slot cover over the empty slot or install a replacement PCI card:
-
To install an expansion slot cover: align the cover with the slot from the rear of the chassis.
Press the cover into the slot. Rotate the retention latch at the rear of the card slot into the
down position. See letter "C" in Figure 72.
- To install a replacement PCI card: see
12. Install the top cover. For instructions, see
150
B

Figure 72. Removing a PCI Card

"Installing a Hot-plug PCI Add-in
"Installing the Top
Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
A
C
TP01583
Card", page 152.
Cover", page 140.